dmesg - Gallium 0.4 on softpipe
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.9.2-antix.1-486-smp (unknown) (root@antiX1) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Tue May 14 02:32:57 EEST 2013
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: ASUSTek Computer INC. A7S8X-MX/A7S8X-MX, BIOS ASUS A7S8X-MX ACPI BIOS Revision 1007 07/28/2005
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 0D0000000 mask FF8000000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f5d20-0x000f5d2f] mapped at [c00f5d20]
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x36c00000-0x36ffffff]
[mem 0x36c00000-0x36ffffff] page 2M
init_memory_mapping: [mem 0x30000000-0x36bfffff]
[mem 0x30000000-0x36bfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x2fffffff]
[mem 0x00100000-0x003fffff] page 4k
[mem 0x00400000-0x2fffffff] page 2M
init_memory_mapping: [mem 0x37000000-0x377fdfff]
[mem 0x37000000-0x373fffff] page 2M
[mem 0x37400000-0x377fdfff] page 4k
BRK [0x016db000, 0x016dbfff] PGTABLE
RAMDISK: [mem 0x372da000-0x37feffff]
Allocated new RAMDISK: [mem 0x365c4000-0x372d968e]
Move RAMDISK from [mem 0x372da000-0x37fef68e] to [mem 0x365c4000-0x372d968e]
ACPI: RSDP 000f7730 00014 (v00 AWARD )
ACPI: RSDT 3fff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3fff30c0 03C14 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 3fff0000 00040
ACPI: APIC 3fff6d00 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
BRK [0x016dc000, 0x016dcfff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x377fdfff]
HighMem [mem 0x377fe000-0x3ffeffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x3ffeffff]
On node 0 totalpages: 262030
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 223230 pages, LIFO batch:31
HighMem zone: 272 pages used for memmap
HighMem zone: 34802 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x40000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f62ac000 s26752 r0 d22400 u49152
pcpu-alloc: s26752 r0 d22400 u49152 alloc=12*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260254
Kernel command line: root=/dev/sda2 nomodeset quiet
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003fff0)
Memory: 1018428k/1048512k available (4282k kernel code, 29692k reserved, 1929k data, 420k init, 139208k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1612000 - 0xc167b000 ( 420 kB)
.data : 0xc142ead2 - 0xc1611240 (1929 kB)
.text : 0xc1000000 - 0xc142ead2 (4282 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f5c06000 soft=f5c08000
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 1806.492 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3612.98 BogoMIPS (lpj=7225968)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 4 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: -1
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20130117
ACPI: All ACPI Tables successfully acquired
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Sempron(tm) (fam: 06, model: 08, stepping: 01)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Brought up 1 CPUs
smpboot: Total of 1 processors activated (3612.98 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
PCI: PCI BIOS revision 2.10 entry at 0xfbce0, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
acpi PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci 0000:00:00.0: [1039:0741] type 00 class 0x060000
pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff]
pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
pci 0000:00:02.0: [1039:0964] type 00 class 0x060100
pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
pci 0000:00:02.5: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:02.5: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:02.5: reg 18: [io 0x0170-0x0177]
pci 0000:00:02.5: reg 1c: [io 0x0374-0x0377]
pci 0000:00:02.5: reg 20: [io 0x4000-0x400f]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
pci 0000:00:02.7: reg 10: [io 0xe000-0xe0ff]
pci 0000:00:02.7: reg 14: [io 0xe400-0xe47f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
pci 0000:00:03.0: reg 10: [mem 0xe3004000-0xe3004fff]
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
pci 0000:00:03.1: reg 10: [mem 0xe3000000-0xe3000fff]
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
pci 0000:00:03.2: reg 10: [mem 0xe3001000-0xe3001fff]
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
pci 0000:00:03.3: reg 10: [mem 0xe3002000-0xe3002fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: System wakeup disabled by ACPI
pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
pci 0000:00:04.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:00:04.0: reg 14: [mem 0xe3003000-0xe3003fff]
pci 0000:00:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:0185] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff pref]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: No dock devices found.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource refined-jiffies
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
system 00:00: [mem 0xffee0000-0xffefffff] has been reserved
system 00:00: [mem 0xfffe0000-0xfffeffff] has been reserved
system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0294-0x0297] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
Switching to clocksource acpi_pm
pci 0000:00:04.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe1000000-0xe101ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 32
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13400k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1370706510.831:1): initialized
bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.21)
aufs 3.9-20130506
msgmni has been set to 1743
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
toshiba: not a supported Toshiba laptop
brd: module loaded
loop: module loaded
pata_sis 0000:00:02.5: version 0.5.2
pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:03.3: EHCI Host Controller
ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:03.3: irq 23, io mem 0xe3002000
ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.9.2-antix.1-486-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xe3004000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.9.2-antix.1-486-smp ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xe3000000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.9.2-antix.1-486-smp ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xe3001000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.9.2-antix.1-486-smp ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
No iBFT detected.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
hd: no drives specified - use hd=cyl,head,sectors on kernel command line
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1.00: ATA-7: MAXTOR STM3160212A, 3.AAJ, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.01: ATAPI: SONY DVD RW DRU-810A, 1.0f, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM SONY DVD RW DRU-810A 1.0f PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 0:0:1:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 420k freed
udevd[63]: starting version 175
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: Fan [FAN] (on)
usb 3-1: new full-speed USB device number 2 using ohci_hcd
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (56 C)
sis900.c: v1.08.10 Apr. 2 2006
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x0001e800, IRQ 19, 00:13:d4:88:4b:09
tsc: Refined TSC clocksource calibration: 1806.392 MHz
Switching to clocksource tsc
usb 3-1: New USB device found, idVendor=041e, idProduct=4053
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
raid6: mmxx1 1511 MB/s
raid6: mmxx2 2678 MB/s
raid6: sse1x1 1419 MB/s
raid6: sse1x2 2288 MB/s
raid6: int32x1 402 MB/s
raid6: int32x2 581 MB/s
raid6: int32x4 538 MB/s
raid6: int32x8 381 MB/s
raid6: using algorithm mmxx2 (2678 MB/s)
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
pIII_sse : 4632.000 MB/sec
prefetch64-sse: 5029.000 MB/sec
xor: using function: prefetch64-sse (5029.000 MB/sec)
Btrfs loaded
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
udevd[349]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [FUTS]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
agpgart-sis 0000:00:00.0: SiS chipset [1039/0741]
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sis630_smbus 0000:00:02.0: SIS630 compatible bus not detected, module not inserted.
microcode: AMD CPU family 0x6 not supported
input: PC Speaker as /devices/platform/pcspkr/input/input4
[drm] Initialized drm 1.1.0 20060810
media: Linux media interface: v0.10
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
gspca_main: gspca_zc3xx-2.14.0 probing 041e:4053
input: gspca_zc3xx as /devices/pci0000:00/0000:00:03.1/usb3/3-1/input/input5
usbcore: registered new interface driver gspca_zc3xx
psmouse serio1: logips2pp: Detected unknown Logitech mouse model 102
wmi: Mapper loaded
input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input6
intel8x0_measure_ac97_clock: measured 54735 usecs (2633 samples)
intel8x0: clocking to 48000
Adding 1022972k swap on /dev/sda3. Priority:1 extents:1 across:1022972k
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda2): re-mounted. Opts: (null)
NET: Registered protocol family 17
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
eth0: Media Link On 100mbps full-duplex
lp0: using parport0 (interrupt-driven).
lp0: console ready
ppdev: user-space parallel port driver